Labconco XVS Ventilation Stations 4865060 User Manual
Page 48
Chapter 7: Accessorizing your XPert or XVS Enclosure
Product Service 1-800-522-7658
44
4. Exhaust Transition Adapters and Dual Exhaust Connectors
A 2" x 10" adapter connects to the enclosure from either the top or the
bottom of the rear plenum so the duct can be routed either up or down,
respectively. The transition is available for either 5.00" I.D. hose or 6"
OD duct. The 5.00" I.D. hose upper connection is standard and included
with the FilterMate. Multiple Exhaust Connectors are used for multiple
FilterMates or connections for 8' exhaust outlets.
Catalog #
Description
Material
3912400
Upper connection, 5" Hose
Coated Steel, Epoxy Coated
Included with FilterMate
3912401
Upper connection, 6" Duct
Coated Steel, Epoxy Coated
3912402
Lower connection, 5" Hose Coated Steel, Epoxy Coated
3912403
Lower connection, 6" Duct
Coated Steel, Epoxy Coated
3981600
Dual Exhaust 8" x 6" x 6"
Coated Steel, Epoxy Coated
Use with 8' unit only to house exhaust
5. Remote Blowers
Has a 1/4 hp direct drive motor and corrosion-resistant epoxy-coated steel
housing and wheel with blower inlet of 6.00" ID. Outlet dimensions are
4.25" x 7.38" OD.
CFM @ Static Pressure-Inches of H
2
O
S.P.
0.0" 0.125" 0.25" 0.50" 0.75" 0.87"
CFM 595 560 515 420 300 167
Catalog #
Description
Shipping Wt.
(lbs./kg.)
4863500
Remote Blower, 115 V, 60 Hz. 4.4 amps
35/16
4863501
Remote Blower, 115/230 V, 50 Hz, 5.6/2.8 amps
35/16
7053501
Explosion-Proof Remote Blower, 115 V, 60 Hz, 4.4 amps
40/18
1/4 hp or 1/3 hp belt drive with adjustable sheave to change RPM.
Corrosion-resistant epoxy-coated steel housing and wheel. Blower inlet is
10.87" ID. Outlet dimensions are a rectangular 5.5" x 10" OD. See
dimensional data in Chapter 7.