Labconco Biological Safety Cabinets 34609 Series User Manual
Page 68
Product Service 1-800-522-7658
63
A
A
p
p
p
p
e
e
n
n
d
d
i
i
x
x
D
D
:
:
A
A
c
c
c
c
e
e
s
s
s
s
o
o
r
r
i
i
e
e
s
s
Note: Accessories marked with an asterisk (*) require a qualified
certifier to install and/or calibrate before use.
Telescoping Base Stands
These stands are available with either fixed feet or caster wheels. The user
sets the height of these stands before installation. The height can be set from
27.5 to 33.5 inches in 1-inch intervals, providing a cabinet work surface
height of 30.0 to 36.0 inches. The Base Stands for each Purifier Cell Logic
Series are listed below.
Width
Cell Logic Series #
Base Stand w/Feet #
Base Stand w/wheels #
3' 34309-xx
3730300
3730310
4' 34409-xx
3730400
3730410
5' 34509-xx
3830500
3830510
6' 34609-xx
3730600
3730610
Telescoping Base Stand Shelf Kit (# 3850100)
This 20 x 8-inch long shelf is specifically designed to hold the Aspirator
Pump or other small accessories, and attaches to the lower right side of the
base stand. The kit includes shelf, braces and self-drilling fasteners. NOTE:
A power drill with a 5/16-inch socket is needed to attach the fasteners to
the base stand.
Manual or Electric Hydraulic Lift Base Stands
These base stands offer infinitely adjustable height between 25.5 and 33.5
inches, giving a cabinet work surface height of 28.0 to 36.0 inches. The
height is adjusted either by a manual (hand crank) or electric pump that
drives hydraulic rams in the legs of the stands. All of the hydraulic stands are
equipped with fixed feet, but can be converted to caster wheels with the
addition of Caster Kit #3784000. The Base Stands for each Purifier Cell
Logic Series are listed below.
Width
Cell Logic Series #
Manual Lift Stand #
Electric (115V) Lift
Stand #
Electric (230V)
Lift Stand #
3' 34309-xx
3780200
3780100
3780103
4' 34409-xx
3780201
3780101
3780104
5' 34509-xx
3780203
3780106
3780107
6' 34609-xx
3780202
3780102
3780105