Labconco Biological Safety Cabinets 34609 Series - Manual (Page 72)

Appendix D: Accessories
Product Service 1-800-522-7658 67
Ergonomic Chair with Armrests (# 3744000)
Lab chair has 6-way articulating seat and back control for personalized
adjustment. Pneumatic mechanism adjusts seat height from 18 1/4" to 25
3/4". Five-leg black reinforced composite base rests on 2" ball bearing
casters. Aluminum support ring. Removable arm rests. Black vinyl
upholstery. Shipping weight 35 lbs. (15.9 kg).
Adjustable Footrest (# 3746000)
Elevates feet and permits angle repositioning while in use. 18 1/2"w x 11
1/2"d x 8"h. Shipping weight 6 lbs. (2.7 kg).
*Inflow/Downflow Sensor Kit (#3859400)
Includes airflow sensor, hardware and wiring needed to display inflow and
downflow on the Information Center LCD. Shipping weight 3 lbs. (1.4 kg).
Aspirator Pump Kit (# 3850300 or 3850301)
Kit includes components required to outfit the cabinet with a system to safely
aspirate fluids. The pump has an integrated 2L glass jar with fill limiter that
seals to contain fluids. The chemically resistant diaphragm pump can be
switched with the foot pedal provided. 10-ft. of clear tubing, filter as well as
a sealed grommet for the cabinet wall is in the kit.
• 3850300 Vacuum Aspiration Kit (Logic) 110V
• 3850301 Vacuum Aspiration Kit (Logic) 220V
Turntable (# 3852000)
The 12-inch diameter Turntable is intended to be utilized in the rear corners
of the biosafety cabinet work area to provide quick access to supplies. Ball
bearing hub and stainless steel upper and lower surfaces are autoclaveable.
*ULPA Supply Filters (# 3859500, 01, 02, 03)
Rated at 99.999% efficiency with particles 0.12 microns.
*ULPA Exhaust Filters (# 3859600, 01, 02, 03)
Rated at 99.999% efficiency with particles 0.12 microns.