Labconco Total Exhaust Biological Safety Cabinets 34368 Series - Manual (Page 16)

Chapter 3: Getting Started
Product Service 1-800-522-7658 10
Original instructions
Telescoping Base Stands
These stands are included with some Logic+ models, or are available
separately. The base stands for each width cabinet are listed in Table 3-1
below.
Width Base Stand w/Feet Model #
4' 3401004
6' 3401006
Manual or Electric Hydraulic Lift Base Stands
These base stands offer infinitely adjustable height between 25.5 and 33.5
inches (648 to 851 mm), giving a cabinet work surface height of 28.0 to 36.0
inches. The height is adjusted either by a manual (hand crank) or electric
pump that drives hydraulic rams in the legs of the stands. All of the hydraulic
stands are equipped with fixed feet, but can be converted to caster wheels
with the addition of Caster Kit #3784000. The base stands for each cabinet
size is listed in Table 3-2 below.
Width Manual Lift Stand # Electric (115V) Lift Stand # Electric (230V) Lift Stand #
4' 3780201 3780101 3780104
6' 3780202 3780102 3780105
Note: When installing the cabinet on a hydraulic lift base stand, a local code-
compliant flexible duct connection must be used between the Logic+’s
exhaust connection and the exhaust ductwork. Ensure that the hydraulic lines
and the electrical cord are clear of any obstructions before installing the
cabinet on the stand or operating the lift system.
Table 3-1
Table 3-2