Labconco Purifie Horizontal Clean Benches 3970424 - Manual (Page 13)

Chapter 3: Getting Started
Product Service 1-800-522-7658 9
Unpacking the Clean Bench
Carefully remove the shrink-wrap or carton on the Clean Bench and inspect it for
damage that may have occurred in transit. If damaged, notify the delivery carrier
immediately and retain the entire shipment intact for inspection by the carrier.
DO NOT RETURN GOODS WITHOUT THE PRIOR
AUTHORIZATION OF LABCONCO. UNAUTHORIZED
RETURNS WILL NOT BE ACCEPTED.
IF CLEAN BENCH WAS DAMAGED IN TRANSIT, YOU
MUST FILE A CLAIM DIRECTLY WITH THE FREIGHT
CARRIER. LABCONCO CORPORATION AND ITS DEALERS
ARE NOT RESPONSIBLE FOR SHIPPING DAMAGES.
Do not discard the packing material until you have checked all of the components
and tested the Clean Bench. We recommend that you do not remove the Clean
Bench from its shipping container until it is ready to be placed into its final
location. Move the Clean Bench by placing a flat, low dolly under the shipping
skid, or by using a floor jack.
Do not move the Clean Bench by tilting it onto a hand truck.
Installing the Vertical Clean Bench on a
Supporting Structure and Work Surface
Use caution when lifting or moving the Clean Bench. When installing the Clean
Bench onto a chemical-resistant work surface or benchtop, ensure that the structure
can safely support the combined weight of the Clean Bench and any related
equipment.
The work surface should be at least as wide and deep as the enclosure to properly
support it. The front of the Clean Bench should be aligned within 0.30" (8 mm) of
the front of the work surface. Mounting holes are provided in the Labconco
accessory work surfaces to secure the Clean Bench.
!


The United
States
Interstate
Commerce
Commission
rules require
that claims be
filed with the
delivery
carrier within
fifteen (15)
days of
delivery.