Labconco Protector Storage Cabinets 99071 - Manual (Page 16)

12
Product Service 1-800-522-7658, International 816-333-8811
Chapter 3: Getting Started
Protector Acid Storage Cabinets
Models 9901000, 9901100, 9901200, 9901300,
9901400, 9901500, 9901600, 9905000, 9905100,
9905200, 9905300
1. Cabinet. Features 18 gauge steel exterior sidewalls.
The cabinet shell is epoxy coated to provide a
durable chemical resistant surface.
2. Door Assembly. Depending on the width, the
cabinet features one or two manual closing, non-
locking doors. The doors are 18 gauge epoxy
coated steel and feature a strike and latch assembly
to hold them in position once closed. The backs of
the doors are lined with polyethylene to provide
additional corrosion protection.
3. Vent Connection. Cabinet features two vent
connections located on the back wall of the cabinet.
These vents are open. Using a Vent Kit, the cabinet
may be vented to the fume hood or directly outside.
Instructions for venting can be found on page 22.
For Acid Vent Kit accessory see page 43.
4. Optional – Accessory Shelf. Features 16 gauge
steel shelf with polyethylene molded tray to hold
spills and provides a chemical resistant surface. The
shelf support kit allows height adjustment.
5. Leveling Feet. Four individual leveling feet provide
adjustability to level the cabinet per the
requirements of your laboratory floor.
6. Acid Shelf Liners. Vacuum formed polyethylene
liner trays fit down into both the adjustable shelf
and the bottom floor of the cabinet. These liner
trays give additional chemical resistance to the
cabinet interior and are removable for easy
cleaning. The liners are watertight in construction
and will contain any minor spills and/or drips from
containers stored in the cabinet.
7. Interior Liner. Interior sides and back are fully
lined with polyethylene plastic to provide excellent
corrosion resistance.
A