Labconco Protector Storage Cabinets 99071 - Manual (Page 6)

2
Product Service 1-800-522-7658, International 816-333-8811
Chapter 1: Introduction
are available in several configurations to meet your
various requirements.
All Protector® Storage Cabinets are designed with
provisions for venting to the exterior of your laboratory.
Vent connections are located on the back wall of the
cabinet and can be used at the discretion of the
customer.
The vent connection on the Solvent Storage Cabinet is
supplied with a closure plug on both sides, and is
diametrically opposed on the back wall of the cabinet
for optimum airflow throughout its interior.
The vent connection on the Acid Cabinet and Standard
Base Cabinet is located on the back wall of the cabinet
and does not include a closure plug.