Setting up your storage cabinet – Labconco Protector Storage Cabinets 99071 User Manual
Page 13
9
Product Service 1-800-522-7658, International 816-333-8811
Chapter 3: Getting Started
Plus the Following:
Part #
Component Description
9920301
Panel, Filler Standard (for 30” Interior Depth
Protector® XL Fume Hood)
or
9920304
Panel, Filler ADA (for 30” Interior Depth
Protector® XL Fume Hood)
9920400
Angle, Filler Panel (for 30” Interior Depth
Protector® XL Fume Hood)
or
9920401
Angle, Filler Panel ADA (for 30” Interior
Depth Protector® XL Fume Hood)
1928300
Leveling Feet (4)
Different filler panel depths are available; refer to
Appendix C: Storage Cabinet Accessories for filler
panel selection.
If you do not receive one or more of the components
listed for your Storage Cabinet, or if any of the
components are damaged, contact Labconco
Corporation immediately for further instructions.
Setting Up Your Storage
Cabinet
After you verify the Storage Cabinet components listed
on the following pages, move your Storage Cabinet to
the location where you want to install it. Then, follow
the steps for installation.