Labconco FreeZone 1 Liter Benchtop Freeze Dry Systems 7740071 - Manual (Page 10)

6 Product Service: Domestic 1-800-522-7658, International 816-333-8811
Chapter 1: Introduction
Typographical Conventions
Recognizing the following typographical conventions will help
you understand and use this manual:
• Book, chapter, and section titles are shown in italic type (e.g.,
Chapter 3: Getting Started).
• Steps required to perform a task are presented in a numbered
format.
• Comments located in the margins provide suggestions,
reminders, and references.
• Critical information is presented in boldface type in paragraphs
that are preceded by the exclamation icon. Failure to comply
with the information following an exclamation icon may result
in injury to the user or permanent damage to your Freeze
Dryer.
• Important information is presented in capitalized type in
paragraphs that are preceded by the pointer icon. It is
imperative that the information contained in these paragraphs
be thoroughly read and understood by the user.
Your Next Step
If your Freeze Dryer needs to be installed, proceed to Chapter 2:
Prerequisites to ensure your installation site meets all of the
requirements. Then, go to Chapter 3: Getting Started for
instructions on how to install your Freeze Dryer and make all of
the necessary connections.
For information on the operational characteristics of your Freeze
Dryer, go to Chapter 4: Using Your Freeze Dryer.
If your Freeze Dryer is installed and you need to perform routine
maintenance on the Freeze Dryer, proceed to Chapter 5:
Maintaining Your Freeze Dryer.
Refer to Chapter 6: Troubleshooting if you are experiencing
problems with your Freeze Dryer.
!
)