Labconco FreeZone 2.5 Liter Freeze Dry Systems 76705 Series - Manual (Page 18)

Chapter 3: Getting Started
Product Service 816-333-8811 or 1-800-522-7658 14
Another way to extend the life of the vacuum pump is to install an optional
secondary trap in the line between the Freeze Dryer and the vacuum pump.
Contact Labconco for ordering information.
With prudent maintenance the FreeZone Freeze Dry System will provide years of
service. Warranty on the affected parts will be voided if maintenance has been
obviously neglected. If you have questions about using specific compounds in the
Freeze Dryer, contact Labconco Technical Service at 1-800-821-5525 or 816-333-
8811 or e-mail: [email protected].
Solvent Safety Precautions
Solvents used in the Freeze Dryer may be flammable or
hazardous to your health. Use extreme caution and keep
sources of ignition away from the solvents. When using
flammable or hazardous solvents, the vacuum pump must be
vented to or operated inside a fume hood.
Hazardous materials such as strong acids or bases, radioactive
substances and volatile organics must be handled carefully and
promptly cleaned up if spilled. If a sample is spilled in the
collector chamber it must immediately be cleaned up.
WARNING: The disposal of substances used in connection with
this equipment may be governed by various Federal, State or
local regulations. All users of this equipment are urged to
become familiar with any regulations that apply in the user’s
area concerning the dumping of waste materials in or upon
water, land or air and to comply with such regulations.
!