Labconco FreeZone 2.5 Liter Freeze Dry Systems 76705 Series - Manual (Page 9)

Chapter 1: Introduction
Product Service 816-333-8811 or 1-800-522-7658 5
Appendix B: Freeze Dryer Dimensions contains comprehensive diagrams showing
the dimensions for the Freeze Dryer.
Appendix C: Freeze Dryer Specifications contains product specifications.
Appendix D: Freeze Dryer Accessories lists the part numbers and descriptions of
all of the accessories available for your Freeze Dryer.
Typographical Conventions
Recognizing the following typographical conventions will help you understand and
use this manual:
 Book, chapter, and section titles are shown in italic type (e.g., Chapter 3:
Getting Started).
 Steps required to perform a task are presented in a numbered format.
 Comments located in the margins provide suggestions, reminders, and
references.
 Critical information is presented in boldface type in paragraphs that are
preceded by the exclamation icon. Failure to comply with the information
following an exclamation icon may result in injury to the user or permanent
damage to your Freeze Dryer.
 Important information is presented in capitalized type in paragraphs that are
preceded by the pointer icon. It is imperative that the information contained in
these paragraphs be thoroughly read and understood by the user.
Your Next Step
If your Freeze Dryer needs to be installed, proceed to Chapter 2: Prerequisites to
ensure your installation site meets all of the requirements. Then, go to Chapter 3:
Getting Started for instructions on how to install your Freeze Dryer and make all
of the necessary connections.
For information on the operational characteristics of your Freeze Dryer, go to
Chapter 4: Using Your Freeze Dryer.
If your Freeze Dryer is installed and you need to perform routine maintenance on
the Freeze Dryer, proceed to Chapter 5: Maintaining Your Freeze Dryer.
Refer to Chapter 7: Troubleshooting if you are experiencing problems with your
Freeze Dryer.
!
