Labconco Protector Controlled Atmosphere Glove Boxes 5080102 - Manual (Page 19)

INSTALLATION
20
volume. If smaller, more restrictive tubing is used, the regulator pressure may be increased
to 30-40 psi to provide ample flow.
Complete Connection Kit, Vacuum and Gas (includes 5060600). Catalog No. 5061100.
See Accessories Section, for list of parts provided in kits.
Glove Attachment
With glove thumbs up and right/left orientation, secure the gloves in place on the glove
ports by stretching the beaded glove cuff into the groove nearest the window. Install the 8"
diameter O-ring onto the outer groove over the glove surface. Install the band clamp over the O-
ring as shown in the drawing below.
Figure 11