Labconco Protector Controlled Atmosphere Glove Boxes 5080102 - Manual (Page 32)

ROUTINE MAINTENANCE
33
Checking Door Latch Tension
Closing the latch handle should require some firm force, indicating compression of the
rubber door seals. Seal compression and latching force can be adjusted as follows:
• First close and latch the door.
• Then using a _ inch open-end wrench, turn the door adjustment screw (located between the
door and the latch bar) clockwise to increase the seal compression and latching force. Turn
screw counterclockwise to decrease compressions. Refer to the illustration below:
Figure 18