Normal operation – Labconco Protector Controlled Atmosphere Glove Boxes 5080102 User Manual
Page 24
Advertising
NORMAL OPERATION
25
Purge/Fill Control Module (Models 5080000 and 5080100)
A. To energize the purge/fill automatic control module, actuate the pressure control power
switch located on the rear panel to the “ON” position.
B. Actuate the exterior outlet switch located on the front control panel to the “AUTO”
position.
Switches and indicator functions are as shown below:
Figure 15
Advertising
This manual is related to the following products:
- Protector Controlled Atmosphere Glove Boxes 5070102 Protector Controlled Atmosphere Glove Boxes 5060102 Protector Controlled Atmosphere Glove Boxes 5080100 Protector Controlled Atmosphere Glove Boxes 5070100 Protector Controlled Atmosphere Glove Boxes 5060100 Protector Controlled Atmosphere Glove Boxes 5080002 Protector Controlled Atmosphere Glove Boxes 5070002 Protector Controlled Atmosphere Glove Boxes 5060002 Protector Controlled Atmosphere Glove Boxes 5080000 Protector Controlled Atmosphere Glove Boxes 5070000 Protector Controlled Atmosphere Glove Boxes 5060000