Labconco Precise HEPA-Filtered Glove Boxes 5220231 - Manual (Page 44)

Chapter 7: Accessorizing Your Glove Box
Product Service 1-800-522-7658 40
31. Drying Train Tubing Kit
Includes the (FEP) tubing and plumbing fittings for connecting typical
moisture, and other gas fume removal components (see item 23
above). Fluorinated ethylene-propylene (FEP) tubing has very low
moisture absorption.
Part # Descriptions
5242500 Drying Train Tubing Kit; Moisture, Solvents,
and Radioisotopes
32. HEPA and ULPA Filters
HEPA filters come standard with the glove box. ULPA filters may be
substituted as an upgrade.
Part # Descriptions
5225105 Replacement Standard HEPA Filter, 99.99%
efficient on 0.3 micron particles
5225106 Optional ULPA Filter, 99.999% efficient on 0.3
micron particles
33. Gloves (see Appendix A: Replacement Parts for glove sizes and
material types)
Neoprene gloves are the most resistant to abrasion and tearing. Butyl
gloves provide higher impermeability and improved dexterity.
Hypalon gloves are made with a mixture of neoprene and butyl rubber
to provide an intermediate level of neoprene and butyl features.
34. Transfer Chamber High Vacuum Sleeve (Part #5236200)
An internal steel reinforced transfer chamber sleeve is required if a
vacuum will be pulled in the transfer chamber.
35. Waste Chute (Part #5245800)
The glove box can be configured to add a waste chute from which a
waste bag can hang. Waste bags and bands can be ordered from your
laboratory dealer. The minimum waste bag size is 8.5" wide.
36. Exterior Transfer Chamber Shelf (Part #5245900)
A powder-coated steel shelf, 10.7" wide x 15.1" deep, can be attached
to the top of the transfer chamber. The exterior transfer chamber shelf
maximizes work area, useful for printers, laboratory supplies, and
notebooks.