Laerdal SimJunior Standard - Manual (Page 15)

13
Advanced System
2. Parameters Readout Area
The learner may also edit scaling, alarm limits, etc. using this interface.
Clicking the parameter of interest will present a menu with available
options. Some fields will only be available while appropriate sensors
are connected to the Manikin.
3. Bottom menus
There are two bottom menus. Press the left or right
arrow key to toggle back and forth between Bottom
Menu 1 and Bottom Menu 2.
Bottom Menu 1 (in order from left to right):
Press the left double-arrow key to display Bottom Menu 1.
Selecting the <Silence Alarm> button turns active
alarm sounds OFF.
Selecting the <Pause Alarms> button turns all
sound alarms off for 3 minutes.
Cardiac Output generates a new reading of Cardiac
Output. The C.O. details will be shown in the C.O.
part of the Patient Monitor PC.
Select the <Graph Trends> button to open and
review.
Selecting the 12-lead ECG button generates a 12-
lead ECG strip. Select <Print> to request this ECG
strip be printed. The request will display on the
Instructor Application.
Bottom Menu 2 (In Order from left to right)
Press the right double-arrow key to display Bottom Menu 2.
Select the <QRS Volume> button to open and
adjust volume (0-10).
Select the <Alarm Volume> button to open and
adjust volume (0-10).
Select the <Radiology> button to open X-ray
images which have been included in the current
scenario.
Select the <Media> button to open display. Select
the <Close> button to close the Media display.
Select the Labs button to open. Select the <Close>
button to close the Labs display.
Select the <Main Setup> button to open. Options
in the <Main Setup> menu are identical to the
similar options displayed on the Menu line.
Select the <Main Screen> button to return to the
<Main Screen>, and cancels all submenus.
Submenus can also be closed by selecting the “X”
box of the submenu.
Importing and Adding Media Files
During a session, the Instructor can make media files available to
learners. Media files include Radiology, Video, and Lab reports. .
Import Media Files
To import media files to make them available for the simulation
sessions:
1. In the Instructor Application, click <File>.
2. Click <Import Media Files> in the drop-down menu. The
Instructor may import any of the existing media files or browse
to select a personal media file.
Add Media Files
To add media files:
1. In the Instructor application, click <File>.
2. Click <Add Media Files> in the drop-down menu.
3. Browse to select a file.
The Instructor can import and add as many media files as required.
Instant Display:
Media files show immediately when transferred.
Ordering Radiology, Media or Labs
The learner can order Radiology, Media or Labs by clicking on any of
the relevant menus in the Patient Monitor Application.
Intr
oduction
Standar
d System
Advanced System
Manikin Setup
Maintenance
Spar
e Par
ts
Tr
oubleshooting
Specifications