Laerdal Twelve Lead Task Trainer - Manual (Page 12)

Running scenarios –
To run a scenario:
1. Start in the waveform (WFM) mode
2. Press the ‘RUN’ button and the display will switch
to selection ‘SEL’ mode and prompt the user to
select a scenario number
3. Select the scenario by pressing a number or the
+/- buttons on the keypad. The rest of the top
line of the display will show the ”DFIB” status and
“TMR” status of the first step of the current
scenario.
4. Once you have selected the scenario you want to
run, press the ‘Run’ button again to start the
scenario.
The text under ‘MOD’ will animate the word ‘RUN’ to
indicate a scenario is running.
The number under ‘SCEN’ indicates the currently
running scenario number.
The number under ‘STEP’ indicates the currently running
step number.
The letter under ‘DFIB’ indicates whether or not defib
advance is enabled for the current step.
The number under ‘TMR’ indicates the time remaining
before the scenario will advance to the next step. The
bottom line displays the currently used waveform
number and name.
Laerdal 12