Lingenfelter L320030709 Lingenfelter CTS-V Intercooler Radiator Kit 2009-13 v1.1 - Manual (Page 17)

Page 16
50. Slide the mesh sleeve over the exposed
portions of the hose and joiner assembly
and cut to length. Secure the end with the
supplied shrink tubing as before, being
careful not to melt the braided hose.
52. Identify the fan control wiring harness (PN:
XX05636-0002) connections:
1. Relays (3x)
2. Fan connector (2x)
3. Fluid temperature sensor connector
4. Fuse holders (3x)
5. Main power (3 wires/2 eyelets)
6. Optional time delay module connector
(mating connector in plastic bag)
7. TBRC 6-pin connecot
8. TBRC power
9. Grounds (3x)
10. Fuse covers (3x in a bag)
51. Secure the hoses with the supplied Zip-ties.
Be sure not to over tighten the Zip-ties as
you risk collapsing the hoses and causing a
flow restriction.
49. Using hose clamp pliers, release the tension
on the stock constant tension hose clamp
that should already be on the hose end.
Install the hose onto the lower rear (inlet)
90 degree fitting of the intercooler radiator.
Once the hoses are clocked properly without
any kinks or improper bends, tighten the
Oetiker clamps in place with Oetiker pliers.
1.
9.
5.
8.
4a & b.
3. 2a.
2b.
10.
4c.
6.
7.