Lingenfelter L460260704 Lingenfelter CAN to Analog Gauge & Relay Output Module CAN2 v1.0 - Manual (Page 39)

Using the software 39
© 2014 Lingenfelter Performance Engineering
4.1 Opening a file or connecting to the CAN2
To run the CAN2 software, click on the CAN2 icon on your desktop (if you created one) or click on the
CAN2 icon in the Start Menu under Lingenfelter Performance>CAN2.
When you first open the software it will look like this with no file loaded. The software will indicate that no
file is loaded by having "No File Loaded" listed in brackets after the software Version number at the top
of the software window, as shown below:
If you want to open an existing file, go to the File menu option and select Open:
A sample file is included as part of the installation process. By default the sample file is saved in the
folder:
My Documents>CAN2>Calibrations [for Windows XP]
Documents>CAN2>Calibrations [for Windows 8]
This is also the recommended location for saving any files LPE or your LPE dealer may send you.
Select the file you want from the Open Window: