3 wireless 5.3.1 basic wireless settings, User guide, Must be a minimum of 8, maximum of 63 characters – Luxul XAP-1040 User Manual
Page 19: More than the minimum number of characters, One or more capital letters, Numbers and/or special characters
a: 14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | p: 801-822-5450
User Guide
19
WPA Passphrase: This sets the passphrase used by client devices to connect to
the wireless network when using WPA Security Mode. For WPA the passphrase:
Must be a minimum of 8, maximum of 63 characters
Can contain spaces or special characters (i.e. @#$%&*)
To change the WPA Passphrase, simply type in the desired passphrase, click
Save,
then
Reboot for the change to take effect.
NOTE: It is recommended to use a strong password containing:
More than the minimum number of characters
One or more capital letters
Numbers and/or special characters
5.3 Wireless
5.3.1 Basic Wireless Settings
Basic Wireless Settings: This screen allows the modifi cation of the following basic
settings for the wireless network:
Wireless Radio: This fi eld is used to Enable and Disable the wireless network
and is set to Enabled by default. If the Radio is Disabled the Access Point will not
broadcast a wireless signal. To Disable the Wireless Radio, click the dropdown
menu, select
Disabled, then click Save and then Reboot for the change to take
effect.
Wireless Mode: Sets the type of 802.11 wireless network to be broadcast.
Available modes are: