2 factory defaults – Luxul XAP-1040 User Manual
Page 26
User Guide
26
© Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
Firmware Upgrade: This page allows for the upgrade of the fi rmware on the XAP-
1040. To check for fi rmware updates, visit www.luxul.com/support.
1. Go to the Luxul website and download the new version of fi rmware
2. Click Browse to locate the fi rmware fi le on your computer
3. Click Upgrade to perform the update
CAUTION: Do not power off the access point or computer being used
during the upgrade or the access point may be damaged.
5.5.2 Factory Defaults
Factory Defaults: Use this page to return the XAP-1040 to the original default set-
tings. Please note that using this feature will reset ALL values and custom changes
or settings that have been made to default settings. It is recommended to backup
current settings prior to performing a Factory Default. To restore factory defaults,
select
Yes in the drop down menu and then select Save and then Reboot for the
settings to take effect.
CAUTION: Restoring default confi guration will re-set all of your
settings to factory defaults. The XAP-1040 will now have the
default IP address 192.168.0.14. For login, default user name
will be “admin” and default password will be “admin.”