Luxul XAP-1040 - Manual (Page 6)

User Guide
6 © Copyright 2014 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
2 XAP-1040 SPECIFICATIONS
Standards

IEEE 802.11n

IEEE 802.11b/g

IEEE 802.3af

IP-66
Hardware

LAN Port: 1 RJ45 10/100 Mbps data and power input

7dBi Circular Polarized Directional Antenna

LEDs: All LEDs are internal and not visible when cover
plate is in place (Power, WLAN active, LAN link/activity,
Bridge mode active).
RF Information

Frequency Band: 2.401 – 2.473GHz

Operating Channels: 11
Available Transmit Power

2.401 – 2.473GHz (IEEE802.11g/n):
Up to 36dBm EIRP

30dBm @ 6~9Mbps / MCS0

29dBm @ 12~18Mbps / MCS1-2

27dBm @ 24~36Mbps / MCS3-4

26dBm @ 48~54Mbps / MCS5-7

2.401 – 2.473GHz (IEEE802.11b):
Up to 36dBm EIRP

30dBm @ 1~11Mbps
Available Receive Gain

2.401 – 2.473GHz (IEEE802.11g/n):
Up to 18dBm

2.401 – 2.473GHz (IEEE802.11b):
Up to 18dBm
Receive Sensitivity
(Typical)
 2.401 – 2.473GHz (IEEE802.11n): Up to -91dBm
 2.401 – 2.473GHz (IEEE802.11g): Up to -92dBm
 2.401 – 2.473GHz (IEEE802.11b): Up to -93dBm
Wireless Operation
Modes

Access Point

Point-to Point Wireless Bridge

Point-to-Multipoint Wireless Bridge
Management and
Security

Remote Web-based Management

WEP (128 bit)

WPA-PSK (TKIP, AES, TKIP&AES)

WPA2-PSK (AES)

WPA-PSK/WPA2-PSK Auto (TKIP&AES)

Web Based Firmware Upgrade

QoS: Wireless Multi-Media (WMM) Extensions
Certifi cations

FCC Part 15, Class B
Power Requirements
 Ethernet POE in: 48VDC/0.375A for IEEE 802.3af Compliance
 Power Consumption: 5W Nominal, 13W Max