LW Measurements MCT 66 - Manual (Page 16)

16
Check the weighing machine immediately after unpacking for externally visible
damage. If you should find transport damage, please inform your service
representative immediately.
If the unit is not to be used immediately after purchase but rather at a later
time, it should be stored in a dry place where fluctuations in temperature are
as minimal as possible. (See Chapter 7 Transport, storage).
Read through these operating instructions; even if you already have prior
experience with weighing equipment, before you work with the unit and pay
attention to the Safety recommendations (see Chapter 1 .Safety).
3.2 Scope of delivery
Inspect delivery for completeness immediately upon unpacking all
components.
Checklist for complete delivery
Component delivered present yes
/ no
Weighing unit body
Weighing platter
Power adapter
Operating manual
3.3 Assembling your weighing machine
The weighing machine is delivered in partly dismantled condition. Assemble
the individual components in the following sequence:

Place the base unit in position and add the weighing platter.

Insert the power adapter cable plug into the socket at the rear of the
balance.
3.4 Choice of a suitable location
The environment in which your weighing machine is used is very important. Air
movement, temperature changes, vibrations, direct sunlight, etc. all influence
the performance of high precision weighing machines. Therefore, place your
weighing machine on a solid, sturdy surface that is free of air currents,