LW Measurements MCT 66 - Manual (Page 26)

26
7 Maintenance and service
The weighing machine must be treated carefully and cleaned regularly. It is a
precision instrument.
For maintenance-work, the machine must be separated from the power supply
(remove power adapter plug from socket). Also ensure that the weighing
machine cannot be reconnected to the power supply during any work by a
third party.
Take care during cleaning that no liquid penetrates into the weighing machine.
If liquid is spilled on the machine, the latter must immediately be disconnected
from the electricity supply. The machine may only be used again after it has
first been checked by a service engineer.
The connections on the back of the appliance and the power adapter should
not come into contact with liquids.
Regularly dismantle the weighing platter and the weighing platter holder and
remove any dirt or dust from under the weighing platter and on the weighing
machine housing with a soft brush or a soft, lint-free cloth, moistened with a
mild soap solution. The platter and the holder can be cleaned under running
water. Ensure that both parts are completely dry before they are re-installed on
the scale.
Never use solvents, acids, alkalis, paint thinners, scouring powders or other
aggressive or corrosive chemicals for cleaning, since these substances attack
the surfaces of the scale housing and may cause damage
8 Transport and storage
8.1 Transportation and shipping
Your weighing machine is a precision instrument. Treat it carefully. Avoid
shaking, severe impacts and vibration during the transportation.