LW Measurements MCT 66 - Manual (Page 20)

20
3. TOTAL DISPLAY is the accumulated total pieces on the scale.
4. The ZERO INDICATOR turns on when the weighing machine is in Zero
position.
5. The TARE INDICATOR turns on when this function is used.
6. LOW SAMPLE WEIGHT turns on when the sample number is not large
enough for accurate counting.
7. LOW UNIT VALUE turns on when sample unit weight is not heavy
enough for accurate counting.
8. NUMERIC (0-9) KEYS are used for setting numeric data for sample
number, sample weight or to limit the HI / LO settings.
9. DECIMAL POINT (.) key is used to set the decimal position of sample
weight.
10. Press the ZERO key to set or re-adjust the scale to the correct zero
position.
11. Pressing the TARE key eliminates the gross weight on the platter (box or
container, etc) as the tare weight.
12. Press the SAMPLE/UNIT (kg/lb) to select the desired weighing unit. The
SAMPLE/UNIT key is also used when setting the counted sample
numbers on the platter into the machine’s memory.
13. The UNIT/WEIGHT key is used when setting the known unit weight data
into the weighing machine during normal operation.
14. The CE key is used for cancelling the numeric setting data or to cancel
the previous unit weight data.
15. QTY/SET key is used for the alternating between normal counting and
quantity check operations.
16. Press the MEMORY (M+) key to save the counted data; data can be
saved up to 99 times.
17. Press the MC key to clear or cancel the data in the memory.