LW Measurements MCT 66 - Manual (Page 17)

17
vibration and not in direct sunlight. The surface should not be magnetic and
should be located away from doors, windows, heaters, air conditioners and
fans.
To summarize:

Put the weighing machine on a solid, firm and preferably vibration-
proof, horizontal base

Make sure that the weighing machine cannot be shaken or knocked
over

Protect from direct solar radiation

Avoid drafts and excessive temperature fluctuations
3.5 Checking the mains voltage
The following Safety recommendations must be observed when connecting
the balance to the mains:
The balance may only be operated with the power adapter supplied.
Check before connecting the power adapter to the mains supply, that the
operating voltage stated on the power adapter agrees with the local mains
voltage.
If the operating voltage is not the same as the mains voltage, the power
adapter must on no account be connected to the mains supply. Contact
customer service.
3.6 Leveling the weighing machine
To function properly, the weighing machine must be precisely horizontal. The
machine is fitted with one bubble level and four (4) adjustable feet for level-
control, with the aid of which it is possible to compensate for small height
differences and/or any unevenness in the surface on which the machine is
positioned.
The leveling feet must be adjusted so that the air bubble is precisely in the
center of the sight glass of the bubble level (see Fig. 1)
Place the weighing machine horizontally and keep the bubble inside the
bubble level aligned with the red circle (See Fig.1). In order to get exact