RODE Microphones NT1 - Manual (Page 11)

When changing the mic position, always be sure to loosen the
adjustment knob fi rst to ensure you do not damage the shock mount.
When recording vocals, always use the supplied pop fi lter, mounted
in front of the microphone. The
pop fi lter will prevent plosives
(hard ‘P’, ‘B’, ‘T’ and ‘K’ sounds)
from overloading the microphone’s
capsule.
For close miking of instruments,
such as guitar cabinets, the front of
the SMR can be removed to allow
closer microphone placement. To
remove the front plate, remove the
two allen keys from above.
RM2
The RØDE RM2 ring mount is
available as an optional accessory.
It can be used in situations where
the NT1 needs to be mounted in
close proximity to instruments or
in any tight space where the SMR
won’t quite fi t.
Diagram 2 Adjust the angle of
the microphone by twisting the
adjustment knob on the SMR.
148-950-1-13_NT1_multilingual_manual.indd 11 148-950-1-13_NT1_multilingual_manual.indd 11 13/08/2013 2:51:43 PM 13/08/2013 2:51:43 PM