RODE Microphones NT1 - Manual (Page 24)

24
After use the NT1 should be removed from its shock mount, wiped
with a dry, soft cloth and placed in the supplied protective dust
cover or supplied zip case.
Alternatively if the mic is being used regularly, we strongly suggest
you cover the mic with the supplied protective dust cover. This can
simply be slipped over while the mic is still in the shock mount.
Be sure to place the moisture-absorbent crystals (supplied) at
the head of the microphone when in storage, so as to absorb any
moisture present. Eventually this pack of crystals will need to be
dried. This is indicated by the crystals turning pink in colour. They
can easily be re-used by placing them in an oven at 100 - 150
degrees celsius for approximately ten minutes. The crystals will
operate effectively again once they have turned blue.
Safety and maintenance
148-950-1-13_NT1_multilingual_manual.indd 24 148-950-1-13_NT1_multilingual_manual.indd 24 13/08/2013 2:51:45 PM 13/08/2013 2:51:45 PM