RODE Microphones NT1 - Manual (Page 14)

14 Microphone placement
There are no set rules when it comes to microphone placement,
but the tips below are a great starting point to achieve great results
in most scenarios. Don’t be afraid to experiment with your own mic
placements to produce the sound that you’d like to pick up with
your NT1.
Recording vocals
• We strongly recommend using the supplied pop shield
attachment for all vocal recording. This aids in minimising
plosive sounds (hard ‘P’, ‘B’, ‘T’ and ‘K’ sounds) that produce
a sudden jet of air which can cause the capsule to overload
and produce a ‘popping’ sound.
• Moisture on the microphone capsule can cause problems for
any condenser microphone. Using the pop shield will reduce
the risk of this occurring.
• Placement of the microphone relative to the vocalist may
be varied on several factors including room acoustics, the
vocal performance, and whether the vocalist has a high or
deep voice.
148-950-1-13_NT1_multilingual_manual.indd 14 148-950-1-13_NT1_multilingual_manual.indd 14 13/08/2013 2:51:43 PM 13/08/2013 2:51:43 PM