SkyRC Tire Warmer - Manual (Page 3)

03 RSTW 02 RSTW
FEATURES
Front & Rear temperature can be set independently
Temperature of 4 tires is controlled by MCU
Removable front & rear tire warmers
8 different beep tones
Minimum temperature
Celsius - Fahrenheit selectable display
Four LEDs indicator
Safety timer
FEATURES
SPECIFICATIONS
Input: 11-15V
Temperature Range : 20-80 , 100 / 68-176 , 212
Keys: Joystick - Up, Down, Left, Right
Dimensions: 92x111.4x50mm
Weight: 440g /
15.52oz
℃ ℃ ℉ ℉
Atmospheric conditions may affect the final tire temperature
Fitted tire warmers must never come into contact with the ground – the car must
always be elevated clear of the ground using suitable stands.
Never use tire warmers unless they are fitted to a tire!
Do not fit, use or remove tire warmers when the car is still power on.
Always check the tire warmers before use, if any signs of wear or damage are
noticed then they must not be used
Never attempt to modify the warmers
Do not leave tire warmers in use unattended
Only for use with 1/10 scale rubber tires
NOTES
HOW TO CONNECT TIRE WARMER TO DC SOURCE
HOW TO CONNECT TIRE WARMER TO DC POWER SOURCE
Located on the left hand side of the tire warmer is a jack for the connection of the DC power cord.
To utilize the tire warmer’s absolute maximum capability, the DC power source must be capable
of delivering at least 8 amps while maintaining 12V DC.
Connect to
AC/DC Adaptor
or LiPo Battery 3S
1.
2. Also located on the bottom of the tire warmer is secondary DC jack. This jack is designed for
docking in to the Efuel Power Supply 17A 230W(SK-200017). Always match polarities (red lead
to red + terminal, black lead to black - terminal).
RacingStar RSTW
Tire Warmer
eFUEL 13.8V/17A
Power Supply.*
(eFuel power supply can be
purchased separately, which is
not included in the package.)
1
2 3
THE SET CONTAINS
1. SKYRC RacingStar RSTW Tire
Warmer Controller
2. Front Tire Warmers
3. Rear Tire Warmers
4. DC Input Cable
4
Dual Banana
Plugs
*