SkyRC Tire Warmer - Manual (Page 4)

05 RSTW 04 RSTW
STEP WARMING
You can warm your tires by 2 step in this mode. It is convenient when you apply two
different kinds of tire additives on your tires.
Three steps has one more warming step, all other functions are exactly the same
as two steps warming.
2 Two Steps
3 Three Steps
LEFT RIGHT
*1/2 20 Minutes*
F:75.0 R:75.0
* Start Delay *
01Minutes
Auto Start Timer
00:55
RIGHT
FR 75 0 RR 75 0
FL 75 0 RL 75 0
*1/2 2/2 Delay
01Minutes
00:27
FR 60 0 RR 60 0
FL 60 0 RL 60 0
Two Steps
Done 00:30
RIGHT
RIGHT
*2/2 10 Minutes*
F:65.0 R:65.0
RIGHT
1
2
3
4
5
6
7
8
9
STEP WARMING
Operating Explanations
Determine first step warming time.
Set front and rear tires target temperature 20-80℃.
Change front or rear temperature.
Move to next set up
Back to former set up
If you need extra hot warming for certain track or weather conditions. You can set
100℃ by hit
key once more when you reach to 80℃.
Determine delay time
Move to next set up
Back to former set up
1
2
QUICK WARMING
QUICK WARMING
1 Quick Warm
2 2Step Warm
This mode is easy to setup, good for standard use. You can change temperature during
warming.
*Quick Warm Set*
F 60 0 R 60 0
Increse front or rear temperature.
Decrese front or rear temperature.
If you need extra hot warming for certain
track or weather conditions, You can set
100℃/212℉ by hit key once more
when you reach to 80℃/176℉.
*Quick Warm Set*
F 60 0 R 60 0
1 Quick Warm
2 2Step Warm
FR 45 0 RR 45 0
FL 45 0 RL 45 0
Change rear temperature.
Start program
Return to main menu.
LEFT
Change front temperature.
RIGHT
RIGHT
You can see elapsed time during quick warming.
Quick Warming
01:30
LEFT
FR 65 0 RR ----
FL 65 0 RL ----
If you see”----” on the display, check warmers connection.
On left display, rear warmers have bad connection or
disconnected.
FR 59 2 RR 60 0
FL 59 6 RL 59.9
Quit out of Quick warming.
or You can change temperature during Quick warming.
RIGHT
It is recommended that the warmers are left on the tires for
about 10 minutes, allowing the rubber to be heated
uniformly and fully. Do not use for any periods longer than
30 minutes as this can damage the tire.
How to setup temperature
During the warming process, upward arrow “ ” means the
temperature is going up.
It disappears when the temperature is reached to target
temperature and the LEDs will turn green.