SkyRC Tire Warmer - Manual (Page 5)

07 RSTW 06 RSTW
USER SET UP
1 Quick Warm
4 User Set Up
*TEMP Display *
Celsius
*TEMP Display *
Fahrenheit
* Safety Time *
30 Minutes
(10-120 Minutes)
* Supply 12.0V *
Cut off : 10. 0V
* Beep Tone *
-1-
* Minimum TEMP *
20.0 C
RIGHT
DOWN
DOWN
DOWN
DOWN
DOWN
Select temperature display celsius - Fahrenheit
Set minimum warming temperature while not using quick
warm and step warm.
Select your favourate beep tone. (OFF, 1-8)
Set low voltage alarm. you can save your expensive
LiPo battery with this function.
We recommend to set at 10V for 3 cell LiPo battery.
Set safety time.
Tire warmer will stop working when reach safety time.
USER SET UP
STEP WARMING
3
Change front or rear temperature.
Move to next set up
Back to former set up
If you need extra hot warming for certain track or weather conditions. You can set
100℃ by hit
key once more when you reach to 80℃.
Determine second step warming time.
Set front and rear tires target temperature 20-80℃
Set auto start timer
Skip count down.
1/ 2 Step Warming
You can check current step and elapsed time.
Quit from step warming.
1/ 2 -2/2 Delaying
You can check temperature or 1/2-2/2 delay time.
Skip delaying, move to 2/2 step warming
All LEDs will blinking in red during delay period.
2/2 Step Warming
You can check current step and elapsed time.
Quit from step warming.
2 Step warming done
4
5
6
7
8
9
Back to former page
All LEDs will blinking in green.