Calibration & factory reset, Liability, Exclusion & warranty – SkyRC Tire Warmer User Manual

Page 6: Calibration, Factory reset, Warranty and service liability exclusion, Conformity declaration

Advertising
background image

09

RSTW

08

RSTW

CALIBRATION & FACTORY RESET

CALIBRATION

You can calibrate your tire warmers with you thermometer.
Calibration is required when the temperature of tire warmers are changed.

With push key and hold, input DC power.

hand off please

TEMP adjust mode

Stop pushing

button.

Determine target temperature for calibration.

* Target TEMP

*

OFF

FR 69

2

RR

6

5

6

FL

68

8

RL

71

0

FL will blink first.
Check the temperature of FL
with you're thermometer

Match the temperature to the value of thermometer

Move cursor to next step.
Calibrate FR-RL-RR warmers as same way.
If you push

key on FL,

step-W will save all calibration data and will restart itself.

LEFT

You can reset the setting when you want to return all values to the original values.

With push key and hold, input DC power.

hand off please

Factory reset

Stop pushing

button.

Factory reset then goes to Main menu.
Exit and goes to Main menu.

FACTORY RESET

Will ask you if factory reset.

NO YES

Factory reset

LIABILITY

EXCLUSION & WARRANTY

We guarantee this product to be free of manufacturing and assembly defects for a period of one
year from the time of purchase. The warranty only applies to material or operational defects, which
are present at the time of purchase. During that period, we will repair or replace free of service
charge for products deemed defective due to those causes.
For any repair or replace service, please contact your dealer in the first instance, who is responsible
for processing guarantee claims. This warranty is not valid for any damage or subsequent damage
arising as a result of misuse, modification or as a result of failure to observe the procedures
outlined in this manual.

This tire warmer is designed and approved exclusively for use with for 1/10 size touring car’s rubber
tires stated in Instruction Manual. SKYRC accepts no liablility of any kind if the tire warmer is used
for any purpose other than that stated. We are unable to ensure that you follow the instructions
supplied with the tire warmer, and we have no control over the methods you employ for using,
operating and maintaining the device. For this reason we are obliged to deny all liability for loss,
damage or costs which are incurred due to the incompetent or incorrect use and operation of our
products, or which are connected with such operation in any way. Unless otherwise prescribed by
law, our obligation to pay compensation, regardless of the legal argument employed, is limited to
the invoice value of those SKYRC products which were immediately and directly involved in the
event in which the damage occurred.

WARRANTY AND SERVICE

LIABILITY EXCLUSION

This symbol means that you must dispose of electrical

from the General household

waste when it reaches the end of its useful life. Take your device to your local waste
collection point or recycling centre. This applies to all countries of the European Union, and

to other European countries with a separate waste collection system.

devices

CONFORMITY DECLARATION

SKYRC

satisfies all relevant and mandatory CE directives and FCC

Part 15 Subpart B: 2008.
The product has been tested to meet the following technical standards:

RacingStar RSTW Tire Warmer

Advertising