SpectraCal Colorimetry Research CR-100 User Manual
Page 3
Advertising
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
Figure 2: Select any or all of the calibration matrices that you may wish to use with the CRI meter.
2. On the Select Calibration Matrix dialog that opens (Figure 2), select any or all of the calibration
matrices that you may wish to use with the CRI meter.
3. Click OK.
4. The Calibration tab should now show the calibration matrices that you selected (Figure 3).
Figure 3: The Calibration tab on the Colorimeter Utility software shows the calibration matrices that you loaded to the
meter's user memory.
Advertising