SpectraCal Panasonic DT50 - Manual (Page 3)


Picture/Colour Balance – Select WARM for colour temperature closest to the D65 target.

Picture/Colour Gamut – Select Rec. 709 for HD calibration.

Picture/Advanced/Gamma – Select 2.2 or 2.4 to test for best performance to selected target.

Picture/Advanced/White Balance – If you will be adjusting the White Balance multipoint
controls (under More Detailed Adjustement), first adjust the display’s Gain and Cutoff controls
to get the white balance tracking close to target. Adjust the Gain controls at 70% or 80% and
adjust the Cutoff controls at 20% or 30%.
CalMAN AutoCal™:

Prior to CalMAN Grayscale AutoCal, set the EU model’s Brightness and Contrast controls to 0
and 60, respectively. For UK models, set them to 30 and 60, respectively

After AutoCal is complete, optimize the Brightness and Contrast controls for the viewing
conditions.