Star Headlight & Lantern STAR-PA RSK966P User Manual
Page 3
-ii-
Table of Contents
NOTICE
Due to continuous product improvements, we must reserve the right to change any specifications and
information, contained in this manual at any time without notice. Star Headlight & Lantern Co., Inc. makes no
warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose. Star Headlight & Lantern Co., Inc. shall not be liable for
errors contained herein or for incidental or consequential damages in connection with the furnishing,
performance, or use of this manual.
SAFETY WARNINGS
i
MOUNTING
1
WIRING INSTRUCTIONS
2-8
PATTERN SELECTION
7
STATUS LED
9
CONNECTING THE REMOTE HEADS
10
TROUBLESHOOTING
11-12
SERVICE & WARRANTY
13
•
IMPORTANT: Please read all of the following instructions before installing your new
strobe system.
•
CAUTION: All of our remote power supplies are polarity sensitive. They are polarity
protected only if the appropriate fuse is used. All wires connected to the positive
terminal of the battery should be fused at the battery for their rated load. Testing the
system before this fuse is properly installed will void the warranty on the light.
•
Opening or tampering with your remote power supply will void the warranty. The
remote power supply must be mounted against a smooth metal surface in a dry
location. Water damage to the power supply will also void the warranty. Typical
mounting locations of your power supply include the interior firewall, beneath the seat
of a truck, or inside a large toolbox.