Star Headlight & Lantern STAR-PA RSK966P - Manual (Page 4)

-1-
Mounting
Mount the pack on a smooth metal surface to allow for adequate heat dissipation. Do not mount
the pack near any external heat source, as this will retard its ability to dissipate heat sufficiently.
Mount the pack using four bolts (not included). When mounting, make sure a good electrical
connection exists between the mounting plate and the vehicle chassis. This will help to eliminate
any RF interference.
When mounting the power pack and accessories, please be sure to keep
any radio frequency sensitive equipment at least 20” from the power pack,
cables, and/or wires which make up your strobe system. The pack has
been designed to limit RFI emissions, but certain very sensitive equipment
may still be affected. Symptoms may include, but are not limited to,
sporadic operation and degraded performance. Star Headlight & Lantern
Co., Inc. cannot assume any responsibility for any radio frequency induced
malfunction or damage to any radios, sirens, lightbars, or any other
equipment mounted within 20” of this strobe system. Any antennae
mounted in the proximity of the system may cause your radio to suffer the
aforementioned results.
5 1
2
"
2 1
2
"
STAR-PAK
STROBE POWER SUPPLY
RP966/RP996 PATTERN
SELECT
POS 1
POS 2
POS 1 1+2 3+4 5+6
LOW
STROBE HEADS
E
N
A
B
L
E
F
U
S
E
P
O
W
E
R 1-2 3-4 5-6
P
-
+
A
B
C I
15
I
STATUS
4 3
4
" 4 1
4
"
POS 2 1 4 5+6 HI
A B C
R
+
+
+
3
16
" DIA.