Star Headlight & Lantern STAR-PA RSK996P - Manual (Page 17)

PLITSTR346 REV. C 11/1/06
MODEL ST415P*
REMOTE STROBE HEAD INSTALLATION
IMPORTANT: Please read all of the following
instructions before installing your new remote strobe
system.
SAFETY MESSAGE TO INSTALLERS
People’s lives depend on your safe installation of our products. It is important to
read, understand and follow all instructions shipped with our products. In addition,
listed below are some other important safety instructions and precautions you should
follow:
•
To properly install this warning light: you must have a good understanding of
automotive electrical procedures and systems, along with proficiency in the
installation and use of safety warning equipment.
•
When drilling into a vehicle structure, be sure that both sides of the surface are
clear of anything that could be damaged.
•
DO NOT install equipment or route wiring or cords in the deployment path of an
air bag.
•
DO NOT attempt to activate the light while driving in a hazardous situation.
•
File this instruction sheet in a safe place and refer to it when maintaining and/or
reinstalling the product.
Failure to follow all safety precautions and instructions may result in property
damage, serious injury, or death to you or others.
The ST415P series strobe heads are designed for use as an auxiliary warning
light system. They will not replace your current headlights or Stop-Tail-Turn
lights, but instead will provide an independent, supplementary warning signal.
3
2
1
ST415P*
ST415P*-W
These are HIGH INTENSITY strobes. DO
NOT stare directly into the light while it is
on, as momentary blindness and/or
permanent eye damage may occur.