Product identification, Local codes, Unpacking product features – Desa CGD3924NR User Manual

Page 4

Advertising
background image

4

103343

AUT

O

MAN

OFF

ST

ATUS

ON

LO

HI

TEMP

PRODUCT

IDENTIFICATION

Figure 1 - Vent-Free Gas Log Heater

LOCAL CODES

Install and use heater with care. Follow all local codes. In the absence of local
codes, use the latest edition of The National Fuel Gas Code ANSI Z223, also
known as NFPA 54*.
*Available from:

American National Standards Institute, Inc.

1430 Broadway

New York, NY 10018

National Fire Protection Association, Inc.

Batterymarch Park

Quincy, MA 02269

Operation

This heater is clean burning. It requires no outside venting. There is no heat loss out
a vent or up a chimney. Heat is generated by realistic dancing, yellow flames. This
heater is designed for vent-free operation with flue damper closed. State and local
codes in some areas prohibit the use of vent-free heaters. You can operate heater as
a vented product by opening flue damper.

Safety Pilot

This heater has a pilot with an Oxygen Depletion Sensor Shutoff System (ODS).
The ODS/pilot is a required feature for vent-free room heaters. The ODS/pilot
shuts off the heater if there is not enough fresh air.

Piezo Ignition System

This heater has a piezo ignitor. This system requires no matches, batteries, or other
sources to light heater.

1. Remove logs and heater base assembly from carton.

Note:

Do not pick up

heater base assembly by burners. This could damage heater. Always handle
base assembly by grate.

2. Remove all protective packaging applied to logs and heater for shipment.
3. Check all items for any shipping damage. If damaged, promptly inform dealer

where you bought heater.

UNPACKING

PRODUCT

FEATURES

Front Log

Control Knob

Back Log

Base Grate

Burner

Piezo
Ignitor

Crossover Log

Middle Log

Remote
Control

Remote
Selector
Switch

Flame
Adjustment
Knob

Advertising