SurgeX SX-AX20E - Manual (Page 10)

© 2015 SurgeX/Electronic Systems Protection, Inc. | Technical Support: 800-645-9721 | surgex.com 10
User Manual
Firmware Version v2.04.281
5.3
Device View
The Device View page provides
information and status for the whole unit
and individual outlets, as well as basic
control of outlets. The top left section of
the page provides system status. To
refresh the status information, click the
“Refresh” button.
For each outlet the Outlet Name,
Present State, Current Draw, Power
Draw, and Energy Usage are displayed.
Mobile Page links are at the bottom left
below the Links section.
Contact Closure input status is displayed.
Device View
Item
Description
Overall System Indicates that the surge protection, rack temperature, line voltage, and
current draw are at acceptable levels.
Surge Protection Indicates that the surge protection is fully functional.
Rack Temperature Displays the temperature of the sensor that is connected to the rear terminal
block. If the temperature sensor is not connected, the display will read “NC”
for Not Connected.
Line Voltage Displays the true-RMS AC voltage.
Current Draw Displays the total current draw of all 8 receptacles in true-RMS Amps.
Power Draw Displays the total power draw of all 8 receptacles in Watts.
Energy Used Displays the total energy consumption of the equipment plugged into the
unit in KW- Hours since the last counter reset. Pressing “Reset Energy
Usage” will reset the KW- Hours count.
On Turns the selected outlets on, staggered by the Delay time.
Off Turns the selected outlets off.
Reboot Turns the selected outlets off for the length of the Reboot Time, and then back on.
History Log Displays the internal history log (if enabled).