SurgeX SX-AX20E - Manual (Page 21)

© 2015 SurgeX/Electronic Systems Protection, Inc. | Technical Support: 800-645-9721 | surgex.com 21
User Manual
Firmware Version v2.04.281
6. Command Line Interface (CLI) Protocol
The Command Line Interface provides complete setup of all functions of the Axess Elite. The CLI may be accessed either via the network interface using Telnet, or via
the serial port using a terminal emulator program. Some commands of the CLI require administrative rights; these are indicated in the following tables.
6.1 Prompts
Prompt Description
User> Prompt to enter a valid User Name. Not case sensitive.
Password> Prompt to enter the Password associated with the User Name. Case sensitive.
Axess ELITE> Standard prompt while logged in.
Axess ELITE Reboot Required> Prompt after making a change which requires a reboot to take effect.
6.2 Syntax
Command Description Standard Syntax
Set This command is used to change a parameter. set <variable> <specifier>
<value>
Get This command is used to return the value of a parameter. get <variable>
Add This command adds an entry row to any array of variables. add <array> <newentry>
Ren This command renames an entry in an array. ren <array> <oldname>
<newname>
Del This command deletes an entry from an array. del <array> <entryname>
6.3 Responses
Response Description
OK The command was received and the syntax was validated.
Error The syntax could not be validated.
Bad command or parameter An incorrect command or parameter was received.
Invalid Command An invalid command was received.
6 .4 CLI Documentation Notation
Notation Description
Text without brackets Items you must type as shown
<Text inside angle brackets> Placeholder for which you must supply a value
Hyphen: - Range of acceptable numeric values
Vertical Bar: | Separator for mutually exclusive items; choose one