Taser X3 - Manual (Page 13)

13
If no cartridge is loaded in the cartridge bay, the cartridge bay empty icon is displayed.
!
If something is wrong with the cartridge, the cartridge bay error icon is displayed. See
the "Load the Smart Cartridges" section in this manual for instructions on loading and
unloading Smart Cartridges from an X3 ECD.
If training cartridges and live cartridges are both loaded into the ECD, the system is designed
to lock the live cartridges to keep them from deploying. The cartridge bay locked icon will
display in place of those live cartridges.
090701007
When you shift the CAM-Lock safety to the down (SAFE) position, a TASER logo and the X3
ECD’s serial number display briefly. This is user changeable.
Central Information Display (CID) Color Graphic User Interface
System Status Icons
WARNING
The system status icons are designed to inform you of a fault in the X3 ECD. It is a fault indicator only, and
it is the user’s responsibility to heed the fault indicators, obtain proper maintenance and repair, and ensure
that the ECD is working properly before any use. Failure to heed the system status icons could cause serious
injury or death.
All faults are recorded in the X3 ECD’s engineering log.
When the CID shows nothing in the lower-left side, the diagnostic system is indicating that
no problems are detected.
!
Minor Fault indication. A yellow triangle in the CID indicates a minor localized problem. It
is like a low fuel tank indicator. No Major or Critical Systems have failed yet, but some minor
error has occurred that may need further action.
Shift the CAM-Lock safety to the down (SAFE) position and then to the up (ARMED) position;
the fault may clear. If this does not work, remove and reinsert the EPM/TPM. If this does not
work, remove and reload the cartridges. If the fault does not clear, it may still be possible to
use the ECD for a short time.
If the fault did not clear, correct it as soon as possible. If necessary, send the ECD to TASER
International for repair. See the "Product Returns" section in this manual for instructions.
Chapter 3 Features & Operation