Taser X3 - Manual (Page 15)

15
The partial/intermittent circuit completion icon indicates that the connection is
marginal.
If the connection is not effective, the no circuit completion icon is displayed. The probes
may have missed the target.
Central Information Display (CID) Color Graphic User Interface
Operating Mode Icons
If the semi-automatic operating mode is selected, this icon is displayed on the CID.
If the manual operating mode is selected, the manual icon displays on the CID.
When the training mode is selected, the training icon displays on the CID.
Central Information Display (CID) Color Graphic User Interface
Power Module Power Level (Energy Cell Indicator)
When the CAM-Lock safety is in the up (ARMED) position, the CID will display the percentage of EPM/TPM
power remaining. Remaining capacity will display in 10 percent increments. When 30 percent is remaining, the
capacity indicator will turn from green to yellow. When the capacity drops to 10 percent, the indicator turns
red.
When the battery level drops to 20 percent, TASER International recommends that the battery be replaced (if it
is an EPM) or recharged (TPM).
100% 60% 70% 80% 90%
50% 40% 30% 20% 10%
Chapter 3 Features & Operation