Taser X3 - Manual (Page 35)

35
SIGHTING MENU
FLASHLIGHT
SINGLE
LASER
ON
SINGLE Upper Laser On Solid (No Blinking)
SIGHTING MENU
FLASHLIGHT
DUAL 1
LASER
ON DUAL 1 Upper Laser on Solid, Lower Laser Blinking
SIGHTING MENU
FLASHLIGHT
DUAL 2
LASER
ON DUAL 2 Upper Laser Blinking, Lower Laser on Solid
8 Press the selector switch to return to the MAIN MENU.
9 You can set the other options. If you are done configuring the X3 ECD, press the selector switch again to
exit.
Configuring The X3 ECD and Viewing the System Status
Auto Power Down
The X3 ECD is set to automatically shut itself off if the safety switch has been left in the up (ARMED) position for
more than 20 minutes. This feature is designed to preserve battery life. However, if your agency’s guidance or
mission requirements dictate otherwise, you can turn this feature off.
1 Point the X3 ECD in a safe direction.
2 Shift the CAM-Lock safety to the down (SAFE) position.
3 Remove the Smart Cartridges from the X3 ECD. See the "Unloading" section in this manual for more
information.
4 Press and hold the selector switch until the MAIN MENU displays.
5 Press the right ARC switch until the OPTIONS option is highlighted.
MAIN MENU
SIGHTING
OPTIONS
LANGUAGE
INFO
SYSTEM
6 Press the left ARC switch.
7 Press the left ARC switch to select OFF or ON.
Chapter 3 Features & Operation