Taser X3 - Manual (Page 59)

59
The deployment log includes the following information for the most recent 1,500+ discharges:
• Date, time, and duration of each discharge in both GMT and local time. Temperature and EPM percentage
remaining at each discharge.
• Record of any time changes made to the X3 ECD’s memory.
• X3 ECD serial number and current software version.
The X3 ECD uses a USB adapter to connect to any Windows 98, 2000, XP or ME computer. The simplicity of USB
makes using the dataport download kit an easy, fast process. The cable connects to the X3 ECD through the
EPM compartment.
Dataport Download Kit
USB Connection Status
USB Ready/USB Busy/USB Error
The X3 ECD is programmed to Greenwich Mean Time (GMT) at the factory. Every time the X3 ECD is connected to
EVIDENCE.COM, the system will perform a time synchronization to GMT. The conversion to local time, including
adjustments to daylight savings time, are all computed in the PC-based software. There is no need to program
the X3 ECD to local time or to reprogram the ECD to daylight savings time.
Chapter 4 Maintenance/Troubleshooting