Taser X3 - Manual (Page 58)

58
The Event Log also stores System Configuration Change Events. This is any time a system configuration is
changed. For example, if the date, time, language, laser or flashlight on/off settings are changed, then the
System Log records when these changes occurred. The Event Log also records when the X3 ECD is set to the
semi-automatic, manual, or training modes.
System configuration also refers to firmware updates. The system log records the date and time of the update,
version information, and whether the update succeeded or not.
Trilogy Log
Pulse Log
The Pulse Log records probe deployments. The records include how long the ECD was discharged, whether
contact was made or not, and the voltage, current and resistance of every pulse.
The Pulse Log also records arc displays that were initiated via the ARC switch. The record of an arc display
includes the event duration and the voltage and current of every pulse.
Trilogy Log
Engineering Log
The Engineering Log monitors the performance of every key sub-system within the X3 ECD and provides alerts
to the user if any subsystem is not performing properly and if maintenance is advisable. Any internal circuitry
errors that occur inside the X3 ECD are written to this log. This information is used for diagnostics and warranty
issues.
Dataport Download Kit
Optional download kits are available to permit departments to access the encrypted deployment information
in the X3 ECD memory through EVIDENCE SYNC and/or EVIDENCE.COM.
The X3 ECD has a highly advanced deployment log that may help protect a user from claims of excessive use
of force by providing documentation of the time and date for each ECD deployment. The deployment log also
provides agencies with a powerful management tool to track usage patterns and help prevent misuse.
Chapter 4 Maintenance/Troubleshooting