Velodyne SMS-1 - Manual (Page 10)

www.velodyne.com 4 - Digital Drive SMS-1 User’s Manual
• PWR – Causes the SMS-1 to stand by.
• NUMERIC KEYPAD – Used to enter an unlock code to enter
SeTUP mode, and for other functions.
• SET (+/-) – Increases or decreases the Q value for a parametric
eQ, or sets values on the SySTem SeTTInGS page.
• LIGHT – Turns the SMS-1’s LCD light on or off.
• NIGHT – Limits the peak output of the SMS-1, and illuminates
the NIGHT indicator on the LCD screen.
• VOL (+/-) – Raises or lowers the volume of your SMS-1 as
indicated on the lcd display.
• MUTE – Mutes and unmutes the SMS-1.
• TEST – Used to toggle between the SYSTEM SETTINGS screen
and the SySTem ReSPOnSe screen during setup.
• EXIT – To exit SETUP mode. The unit will ask if you want to save
settings before exiting.
• SELECT - To toggle field values.
• RESET – Used to reset volume to the last saved setting on the
main screen, and to defeat crossovers on the settings screen.
• MENU – Enters SETUP mode from the introductory screen.
• PRESETS – To access the five presets and one EQ defeat
listening modes. Initially set at the factory, they are fully user
adjustable. The front panel lcd indicates which preset you
have selected.
Figure 1: Velodyne Digital Drive remote control
REMOTE CONTROL BUTTONS
A brief description of each button on the remote control follows: