Velodyne SMS-1 User Manual
Page 27
Advertising
![background image](/manuals/743127/27/background.png)
www.velodyne.com
Digital Drive SMS-1 User’s Manual - 21
9. now use the dd remote control to unmute the SmS-1, then use the volume up and down keys to match
the level of the SmS-1 to your full range speakers. That is, the “SySTem ReSPOnSe” graph should be
relatively flat (although at this point there will be peaks and valleys that will be addressed next).
NOTE: you may also need to adjust the volume of your subwoofer to achieve a good match.
Make sure that the SMS-1’s volume is not too low – it may require experimentaion to find the
proper balance between SmS-1 volume and your subwoofer’s volume.
The screen should now look something like this:
Advertising