Velodyne SMS-1 - Manual (Page 12)

www.velodyne.com 6 - Digital Drive SMS-1 User’s Manual
(1) POweR – Press the POweR switch to the On position to activate the SmS-1. If the unit is to be left
unused for an extended period of time, press the switch to the OFF position to prolong the life of
the SmS-1.
(2) IR Remote Sensor.
(3) lcd display – This display shows subwoofer volume, preset, and indicates auto-eQ, self- eQ, mute,
and night mode operation.
(4) MIC INPUT – This XLR input jack is for the XLR microphone cable.
(5) VOlUme UP/dOwn – Press the black UP pushbutton to incrementally raise your SmS-1’s system
volume; press the black dOwn pushbutton to incrementally lower your SmS-1’s system volume.
note the use of these buttons during software updates.
(6) LFE OUTPUT – This balanced connector sends the conditioned subwoofer audio signal to your
subwoofer.
(7) LFE INPUT – This XLR input jack receives the LFE signal from your receiver or processor.
(8) MIC INPUT – This XLR input jack is for the XLR microphone cable.
(9) IR RemOTe – This connection allows for hook-up of an IR signal from a repeater or other similar
device.