Velodyne SMS-1 - Manual (Page 29)

www.velodyne.com Digital Drive SMS-1 User’s Manual - 23
TIP: Here’s an easy way to find the optimal position for the subwoofer without moving it to multiple positions in
the room. Start by setting the subwoofer up in your listening position. now, move the microphone around the
room and observe the response graphs for different room positions. The best position has the fewest valleys
and the overall smoothest response.
NOTE: If you are constrained in room location positions, don’t worry! By following the setup steps below, digital
Drive gives you maximum flexibility to make the most out of any subwoofer placement position.
11. Now that the room location has been chosen, turn off the SMS-1 and the rest of your system, permanently
route the wiring, and reconnect to your SmS-1.
12. Reactivate the SmS-1 and your system and ensure that the system works as before.
13. Use the menU button to get to the eQ setup screen (after entering the 12345 code), and then position the
cursor over the NEXT field on the EQ setup screen. Press SELECT, and observe the SYSTEM SETTINGS
screen, as follows:
You are now ready to adjust the crossover, subsonic filter, volume, and phase controls of your SMS-1.
NOTE: if the remote seems intermittent or unresponsive, be sure you are pointing it at the subwoofer and not
your TV!